SN74HC74PWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 30ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC74PWT Overview
In the form of 14-TSSOP (0.173, 4.40mm Width), it has been packaged. A package named Tape & Reel (TR)includes it. In the configuration, Differentialis used as the output. Positive Edgeis the trigger it is configured with. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. The operating temperature is -40°C~85°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. Its output frequency should not exceed 60MHz Hz. During its operation, it consumes 4μA quiescent energy. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. Members of the 74HC74family make up this object. An input voltage of 5Vpowers the D latch. There is 3pF input capacitance for this T flip flop. This D flip flop belongs to the family of HC/UH. This electronic part is mounted in the way of Surface Mount. There are 14pins on it. A Positive Edgeclock edge trigger is used in this device. The part you are looking for is included in FF/Latches. It reaches the maximum supply voltage (Vsup) at 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. The superior flexibility of this circuit is achieved by using 2 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The supply voltage should be maintained at 5V for high efficiency. Its output current of 5.2mAallows for maximum design flexibility. The number of input lines is 4.
SN74HC74PWT Features
Tape & Reel (TR) package
74HC series
14 pins
SN74HC74PWT Applications
There are a lot of Texas Instruments SN74HC74PWT Flip Flops applications.
- Circuit Design
- Functionally equivalent to the MC10/100EL29
- High Performance Logic for test systems
- Automotive
- Safety Clamp
- Instrumentation
- Divide a clock signal by 2 or 4
- Common Clocks
- Supports Live Insertion
- ESD performance
