SN74HC74QPWRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 56.812444mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 60MHz |
| Propagation Delay | 175 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 15 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 39ns @ 6V, 50pF |
| Prop. Delay@Nom-Sup | 50 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HC74QPWRQ1 Overview
As a result, it is packaged as 14-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tape & Reel (TR)package. Currently, the output is configured to use Differential. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. Temperature is set to -40°C~125°C TA. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the Automotive, AEC-Q100, 74HC series. In order for it to function properly, its output frequency should not exceed 60MHz. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74HC74 family. The power supply voltage is 5V. A 3pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of HC/UH. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 14 pins. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. The maximal supply voltage (Vsup) reaches 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. 2 circuits are used to achieve its superior flexibility. In light of its reliable performance, this T flip flop is well suited for TR. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It is reported that there are 4 input lines. There is a consumption of 4μAof quiescent current from it.
SN74HC74QPWRQ1 Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74HC series
14 pins
SN74HC74QPWRQ1 Applications
There are a lot of Texas Instruments SN74HC74QPWRQ1 Flip Flops applications.
- Data Synchronizers
- Single Up Count-Control Line
- High Performance Logic for test systems
- Shift Registers
- Dynamic threshold performance
- Convert a momentary switch to a toggle switch
- Circuit Design
- ATE
- Synchronous counter
- Control circuits
