SN74HCT139DE4
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 43 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 43 ns |
| Family | HCT |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| High Level Output Current | 4mA |
| Low Level Output Current | 4mA |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 16 |
SN74HCT139DE4 Overview
In order to save board space, digital switch is located in the SOIC.The package is packaged in accordance with Rail/Tube.Among its basic configurations are 16 terminations.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch has a total of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.There is a type of supply of Single.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch belongs to the family of HCT.Signal multiplexer contains 4 bits.For mux switch's normal operation, there is a power supply provided at 5V.I would classify the digital switch ic as an electronic part belonging to the Decoder/Drivers category.Without the influence of external factors, it consumes 8μA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.A signal source is provided by 4 output lines.The maximum temperature for this signal switch is 85°C.In order to maintain a minimal operating temperature of the multiplexer, it should be set at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 5.5V.The digital swith is specified to operate at the minimum supply voltage of 4.5V in compliance with the applicable device specification.The configuration of the mux switch contains 2 elements.OTHER DECODER/DRIVER is the logic integrated circuit used in the digitalswitch.
SN74HCT139DE4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
4 output lines
OTHER DECODER/DRIVER as the logic IC
SN74HCT139DE4 Applications
There are a lot of Texas Instruments SN74HCT139DE4 Signal Switches / Multiplexers / Decoders applications.
- Used to connect a single source to multiple destinations
- Transmission from the computer system of a satellite
- High-performance memory systems
- Electronics industry
- Communication system
- Code conversion
- Memory system of computers
- CPU memory location identification
- A/D converters
- Logic circuits
