Parameters |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
16 |
Weight |
141.690917mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
16 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
Decoder/Drivers |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Pin Count |
16 |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Polarity |
Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Propagation Delay |
43 ns |
Quiescent Current |
8μA |
Turn On Delay Time |
43 ns |
Family |
HCT |
Logic Function |
Decoder, Demultiplexer |
Supply Type |
Single |
Bandwidth |
28MHz |
Logic IC Type |
OTHER DECODER/DRIVER |
High Level Output Current |
4mA |
Low Level Output Current |
4mA |
Number of Output Lines |
4 |
Input Conditioning |
STANDARD |
Height |
1.58mm |
Length |
9.9mm |
Width |
3.91mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74HCT139DG4 Overview
For the purpose of saving board space, digital switch is included in the SOIC.Rail/Tube is the method used for packaging.There are 16 terminations included in its basic configuration.The multiplexer is supplied with 5V voltage.This turn signal switch has a total of 16 component pins.As a result, conductors end at GULL WING.Single is employed as its supply type.There are 16 pins on it.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the HCT family.A power supply is provided for mux switch's normal operation of 5V.Decoder/Drivers is a category for the digital switch ics.Without the influence of external factors, it consumes 8μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.There are 4 output lines on the signal source.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.The device is specified to operate at a maximum supply voltage of 5.5V in accordance with the applicable device specification.A minimum supply voltage of 4.5V is specified for the digital swith by its applicable specification.The configuration of the mux switch contains 2 elements.IC OTHER DECODER/DRIVER is used for the logic of this chip.
SN74HCT139DG4 Features
Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
4 output lines
OTHER DECODER/DRIVER as the logic IC
SN74HCT139DG4 Applications
There are a lot of Texas Instruments SN74HCT139DG4 Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- LVDS
- Make half adder
- Data bus control
- Data communication
- VGA
- Electronically controlled engine system
- Robotic vehicles
- Transmission from the computer system of a satellite
- Enabling different functions units in microprocessor instruction decoding