SN74HCT139PWRE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Propagation Delay | 43 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 43 ns |
| Family | HCT |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| Power Supply Current-Max (ICC) | 0.08mA |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HCT139PWRE4 Overview
In order to save board space, digital switch is located in the TSSOP.It is packaged according to the Tape and Reel method.There are 16 terminations included in its basic configuration.The turn signal switch is supplied with a voltage of 5V volts.Signal switch has 16 component pins.As a result, GULL WING represents the end of the conductors.There is a supply type of Single employed as part of this supply.Currently, it is configured with 16 pins.The mounting point is Surface Mount.The HCT family includes the logic switch.Signal multiplexer contains 4 bits.In order to maintain mux switch's normal operation, power is provided to 5V.Part number Decoder/Drivers indicates that the digital switch ic is an electronic part.It consumes 8μA current of multiplexer ic without external influences.Supply voltages of 5V can provide reliable performance of the multiplexers.A TR packaging method is used in the switches.A signal source consists of 4 output lines.It is acceptable for this signal switch to operate at the maximal temperature of 85°C.It is recommended that a minimum operating temperature of the multiplexer of -40°C be maintained.The device is specified to operate at a maximum supply voltage of 5.5V in accordance with the applicable device specification.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 4.5V.It contains 2 elements in mux switch configuration.It employs OTHER DECODER/DRIVER as its logic IC.
SN74HCT139PWRE4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
4 output lines
OTHER DECODER/DRIVER as the logic IC
SN74HCT139PWRE4 Applications
There are a lot of Texas Instruments SN74HCT139PWRE4 Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Video transmission
- GLAN
- Make half adder
- Computer memory
- Analog to digital conversion
- A/D converters
- Data communication
- Textile mills
- A robotic vehicle with the metal detector
