SN74HCT139PWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Decoder/Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Polarity | Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 43 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 43 ns |
| Family | HCT |
| Logic Function | Decoder, Demultiplexer, Demux |
| Number of Inputs | 2 |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| Number of Output Lines | 4 |
| Input Conditioning | STANDARD |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
SN74HCT139PWRG4 Overview
This is a relatively small item of digital switch that is included in the TSSOP in order to save space on the board.The package is packaged in accordance with Tape and Reel.There are 16 terminations included in its basic configuration.The multiplexer's system works with 5V voltage.This turn signal switch has a total of 16 component pins.As the end of conductors, it uses GULL WING.There is a type of supply Single that is employed in this case.The board has 16 pins configured.As you can see, it is mounted in the direction of Surface Mount.The logic switch is included into the family of HCT.The power supply of 5V is provided for mux switch's normal operation.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.In the absence of external influences, it consumes 8μA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.In this multiplexer, there is a total of 2 inputs.A signal source has 4 output lines.The signal switch can operate at a maximum temperature of 85°C.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.It is specified that the signal switches should operate at 5.5V as its maximum supply voltage.Typical device specifications specify a voltage supply of 4.5V for the digital swith.In terms of logic ICs, it uses OTHER DECODER/DRIVER.
SN74HCT139PWRG4 Features
Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
4 output lines
OTHER DECODER/DRIVER as the logic IC
SN74HCT139PWRG4 Applications
There are a lot of Texas Instruments SN74HCT139PWRG4 Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- Metal detectors
- Used to connect a single source to multiple destinations
- Speed synchronization of multiple motors in industries
- Medical industry
- Idle motor
- Code conversion
- Implementing boolean functions with multiple variables
- HD surveillance system
- Data transfer
