SN74HCT257DRE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT257 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 35 ns |
| Family | HCT |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Supply Type | Single |
| Bandwidth | 28MHz |
| Output Polarity | TRUE |
| Max I(ol) | 0.006 A |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT257DRE4 Overview
Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).It is packaged according to the Tape & Reel (TR) method.Surface Mount is the mounting method digital switch ic uses.As the analog part, the circuit uses an analog IC Multiplexer.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When operated with a 4.5V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.Several applications are possible for 74HCT series multiplexers.There are 16 terminations included in its basic configuration.The base part number is 74HCT257, which is also useful when looking up signal switch's related components.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch consists of 16 component pins.As a result, GULL WING represents the end of the conductors.This supply type employs Single.It is configured with 16 pins.This unit is mounted in the way of Surface Mount.In the HCT family, the logic switch is included.In the signal multiplexer, there are 2 bits available.The power supply of 5V is provided for mux switch's normal operation.The turn signal switch has 1 outputs.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.This multiplexer is equipped with 8 inputs and 8 outputs.A TR packaging method is used in the switches.A total of 4 transmission channels are available in the turn signal switch's circuit.
SN74HCT257DRE4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74HCT257DRE4 Applications
There are a lot of Texas Instruments SN74HCT257DRE4 Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Telephone network
- Data collection system
- HDMI applications
- A/D converters
- HD surveillance system
- Video transmission
- Microprocessor memory systems
- Enabling different rows of memory depending on address in memory chips
- Electronically controlled engine system
