SN74HCT273DWRG4
| Parameters | |
|---|---|
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latch |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 37MHz |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Propagation Delay | 42 ns |
| Turn On Delay Time | 15 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Logic IC Type | D FLIP-FLOP |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| fmax-Min | 23 MHz |
| Clock Edge Trigger Type | Positive Edge |
SN74HCT273DWRG4 Overview
The package is in the form of SOIC. D flip flop is included in the Tape & Reel (TR)package. D latch consists of 1 elements. 20terminations have occurred. The D flip flop is powered by a voltage of 5V . A device of this type belongs to the family of HCT. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 20. This device exhibits a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latch. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The system runs on a power supply of 5V watts. Optimal efficiency requires a supply voltage of 5V. The high level output current is set to -4mA. 4mAis set as the low level output current. Operating temperatures should be lower than 85°C. Operating temperatures should be above -40°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.5VV. It supports the maximal supply voltage of 5.5V. The frequency can be set to 37MHz. The logic IC it adopts is D FLIP-FLOP. There are 1 functions available on this T flip flop. With 20 pins, it is equipped with a low power consumption.
SN74HCT273DWRG4 Features
Tape & Reel (TR) package
20 pins
5V power supplies
1 Functions
20 pin count
SN74HCT273DWRG4 Applications
There are a lot of Texas Instruments SN74HCT273DWRG4 Flip Flops applications.
- Storage registers
- Common Clocks
- Computers
- Data storage
- EMI reduction circuitry
- Instrumentation
- Balanced Propagation Delays
- 2 – Bit synchronous counter
- Consumer
- Bus hold
