SN74HCT32DRG4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 122.413241mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Gates |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT32 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Propagation Delay | 22 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 27 ns |
| Family | HCT |
| Logic Function | OR |
| Number of Inputs | 2 |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | OR Gate |
| Max Propagation Delay @ V, Max CL | 22ns @ 5.5V, 50pF |
| Prop. Delay@Nom-Sup | 30 ns |
| Schmitt Trigger | NO |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
SN74HCT32DRG4 Overview
Packed in 14-SOIC (0.154, 3.90mm Width), the part is convenient for shipping overseas. High reliability is achieved by using advanced packaging method Tape & Reel (TR). OR Gate logic is the basis of its operation. In order for the part to function correctly, a voltage of 4.5V~5.5V is required. Operational temperature extended around -40°C~85°C. In Surface Mount, the part is mounted. In both high and low states, output current is 4mA 4mA. 74HCT is its series number. Totally, there are 14 terminations. It has 4 functions that enhance user experience significantly. There is a chip like this in HCT. Try searching with 74HCT32 to find device variants. Part bodies are injected with 14 pins. The logic device can be mounted on the Surface Mount axis and is used in a wide range of applications. For details about the functions of 14 pins, please refer to the datasheets. It supports inputs of 2. In the quiescent state, the part has 2μA current flowing through it. The logic device shown here is a typical Gates. There is 50pF load capacitance on the part. It is packed with the industry TR method. The datasheet specifies that the part requires 5V volts of power. In this case, the output current is rated as 4mA. The device has 1 outputs. The total number of elements used for operation is 4. It is specified in the operating instructions of the chip that the operating voltage will be 5V volts.
SN74HCT32DRG4 Features
OR Gate Logic Type
Operating Temperature: -40°C~85°C
HCT Family
Quiescent Current: 2μA
Output Current: 4mA
SN74HCT32DRG4 Applications
There are a lot of Texas Instruments SN74HCT32DRG4 Gates and Inverters applications.
- Cell phone
- Urban rail vehicle
- Fan
- Overvoltage and undervoltage protection
- Car refrigerator
- Air conditioner
- Electricity for military and civilian life in areas without electricity
- Overcurrent/Short circuit protection
- Range hood
- Electric car
