banner_page

SN74HCT373DBR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT373 20 Pins DUAL CMOS 20-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HCT373DBR
  • Package: 20-SSOP (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 755
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT373 20 Pins DUAL CMOS 20-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Weight 156.687814mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74HCT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74HCT373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 6mA
Number of Bits 8
Propagation Delay 47 ns
Turn On Delay Time 25 ns
Family HCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 6mA 6mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.006 A
Prop. Delay@Nom-Sup 44 ns
Number of Input Lines 8
Independent Circuits 1
Height Seated (Max) 2mm
Length 7.2mm
Width 5.3mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HCT373DBR Overview


The 20-SSOP (0.209, 5.30mm Width) package contains it. Tape & Reel (TR) is the packaging method. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. According to Surface Mount, this electronic part is mounted. With a supply voltage of 4.5V~5.5V, it operates. It is -40°C~85°C at the operating temperature. 74HCT is the series number of this FPGA. The electronic part in this image has 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. As a member of the 74HCT373 family, it falls under that category. The supply voltage of the device is 5V. The 20 pind are equipped with it. It is part of the family of electronic devices called HCT. The device has 20 pins. This electronic part is mounted in the way of Surface Mount. 2 ports are available on this device. FF/Latches is the subcategory of this part. A total of 5V power supplies are required for it to operate. It contains 8 input lines where electronic circuits are present. Its reliable performance makes it an excellent choice for TAPE AND REEL. As the output current is 6mA, the design flexibility is maximum. High efficiency requires a voltage supply of 5V.

SN74HCT373DBR Features


20-SSOP (0.209, 5.30mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies

SN74HCT373DBR Applications


There are a lot of Texas Instruments SN74HCT373DBR Latches applications.

  • Parallel-to-Serial Data Conversion
  • Parallel data storage
  • Buffer Storage
  • Parallel data storage
  • Display
  • Registers
  • Frequency
  • Hammer Device Information
  • Sample and hold register
  • Hammer

Write a review

Note: HTML is not translated!
    Bad           Good