SN74HCT373DBRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 47 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT373DBRE4 Overview
A package called 20-SSOP (0.209, 5.30mm Width) contains it. It is packaged in the way of Tape & Reel (TR). In this configuration, the output is set to Tri-State. D-Type Transparent Latch is the logic type of this electrical device. A Surface Mount mount is used for mounting this electronic part. It operates at a voltage of 4.5V~5.5V. A temperature of -40°C~85°C is used for operation. The 74HCT series is associated with this FPGA. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations that have been designed. The family it belongs to is 74HCT373. In order to operate it, the supply voltage must be 5V. 20 pins are included. In the world of electronics, this electronic device belongs to the family of HCT. The 20 pins are designed into it. The electronic part is mounted using the Surface Mount method. This device is equipped with 2 ports. The part belongs to the FF/Latches subcategory. The device is powered by 5V power supplies. It contains 8 input lines where electronic circuits are present. On the basis of its reliability, this device is well suited for TAPE AND REEL. The 6mA output current gives it maximum design flexibility. A high level of efficiency is achieved by maintaining the supply voltage at 5V.
SN74HCT373DBRE4 Features
20-SSOP (0.209, 5.30mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
SN74HCT373DBRE4 Applications
There are a lot of Texas Instruments SN74HCT373DBRE4 Latches applications.
- A/D and D/A conversion
- Accumulator Registers
- Up/down difference counting
- Up-Down Johnson
- BCD counting
- Relay
- Buffer Storage
- Pattern generators
- Parallel Input
- Pattern Generators
