SN74HCT373DBRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 156.687814mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 47 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT373DBRG4 Overview
Package 20-SSOP (0.209, 5.30mm Width) includes it. Tape & Reel (TR) is the way in which it is packaged. It uses the output configuration Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Electronic components are mounted using the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. This FPGA is part of the 74HCT series. This electronic part is designed with 8 Bits. In this device, there are 20 terminations. The family 74HCT373 includes it. The device works with a voltage of 5V for its supply voltage. It has 20 pins that makes it easy to use. This electronic device is categorized as a HCT electronic device. It is designed with 20 pins. Surface Mount is the method used for mounting this electronic part. This device is equipped with 2 ports. In the subcategory FF/Latches, this part belongs. A total of 5V power supplies are needed to run it. There are 8 input lines in which electronic circuits are present. The device's reliable performance makes it a good choice for TAPE AND REEL. It features maximum flexibility in design due to 6mA output current. High efficiency requires a voltage supply of 5V.
SN74HCT373DBRG4 Features
20-SSOP (0.209, 5.30mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
SN74HCT373DBRG4 Applications
There are a lot of Texas Instruments SN74HCT373DBRG4 Latches applications.
- Up/down difference counting
- Hammer Device Information
- Parallel data synchronization
- Parallel data storage
- Pattern generators
- Shift right register
- Sample and hold register
- Automotive HEV/EV Powertrain
- Parallel-to-Serial Data Conversion
- Motor Drives
