banner_page

SN74HCT373DW

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HCT373DW
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 345
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT373 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74HCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74HCT373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Number of Circuits 8
Operating Supply Current 80μA
Number of Ports 2
Output Current 6mA
Number of Bits 8
Propagation Delay 27 ns
Quiescent Current 8μA
Turn On Delay Time 25 ns
Family HCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 6mA 6mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.006 A
Prop. Delay@Nom-Sup 44 ns
Control Type ENABLE LOW
Number of Input Lines 9
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HCT373DW Overview


The 20-SOIC (0.295, 7.50mm Width) package contains it. A Tube package is used to package it. It uses Tri-State as its output configuration. This electrical device has the logic type D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. A voltage of 4.5V~5.5V is used as the supply voltage for this device. It operates at -40°C~85°C degrees Celsius. The 74HCT series of FPGAs is the one this FPGA belongs to. It is designed with 8 bits. This device has 20 terminations. The family in which it belongs to is 74HCT373. In order to function, the supply voltage should be set to 5V. It has 20 pins that makes it easy to use. This electronic device is categorized as a HCT electronic device. The 20 pins are designed into it. This electronic part is mounted in the way of Surface Mount. This device has a total of 2 ports. The part belongs to the FF/Latches subcategory. 5V power supplies are needed to operate it. It consists of 9 input lines from which an electronic circuit can be built. As the output current is 6mA, the design flexibility is maximum. For maximum efficiency, the supply voltage should be set to 5V. Without external influences, it consumes 8μA of quiescent current. It achieves superior flexibility by using 8 circuits.

SN74HCT373DW Features


20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies

SN74HCT373DW Applications


There are a lot of Texas Instruments SN74HCT373DW Latches applications.

  • Timers
  • Avionics
  • Pseudo-random code generators
  • Ring counter
  • Shift register
  • Shift left with parallel loading
  • Serial Output Register
  • A/D and D/A conversion
  • Counting
  • Parallel-to-Serial Data Conversion

Write a review

Note: HTML is not translated!
    Bad           Good