SN74HCT373DWE4
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Current - Output | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 47 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| High Level Output Current | -6mA |
| Low Level Output Current | 6mA |
| Control Type | ENABLE LOW |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HCT373DWE4 Overview
SOIC contains it. A package of Rail/Tube has been used. There are 8 bits in this electronic part. This device has 20 terminations. A 5V voltage supply is required for operation. The 20 pind are equipped with it. It is a member of the HCT family of electronic devices. The pin configuration of the device is 20. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports that can be connected to it. In the subcategory FF/Latches, this part belongs. There are 5V power supplies required for this machine to operate. Optimal efficiency requires 5V as the supply voltage. Its superior flexibility is achieved by using 8 circuits. 6mA is the low level output current. In the high level output current, the value is set to -6mA. It is recommended that the operating temperature not exceed 85°C. It is recommended to operate at a temperature higher than -40°C. 5.5V is the maximum voltage it supports. There is a minimum supply voltage of 4.5V for it. As far as the logic IC is concerned, it uses BUS DRIVER. As the output current is 6mA, the design flexibility is maximum.
SN74HCT373DWE4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74HCT373DWE4 Applications
There are a lot of Texas Instruments SN74HCT373DWE4 Latches applications.
- Parallel Input
- Pseudo-random code generators
- Serial Output Register
- Automotive HEV/EV Powertrain
- Parallel Output
- Lamp and Display (LED)
- Automotive Infotainment
- Digital bus buffer
- Relay replacement
- Ring counter
