Parameters |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Number of Circuits |
8 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Current - Output |
6mA |
Number of Bits |
8 |
Propagation Delay |
65 ns |
Turn On Delay Time |
25 ns |
Family |
HCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.006 A |
Prop. Delay@Nom-Sup |
44 ns |
High Level Output Current |
-6mA |
Low Level Output Current |
6mA |
Independent Circuits |
1 |
Height |
2.35mm |
Length |
12.8mm |
Width |
7.52mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Package / Case |
SOIC |
Number of Pins |
20 |
Weight |
500.709277mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FF/Latches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
SN74HCT373DWG4 Overview
The SOIC package contains it. A Rail/Tube package is used to package it. 8 Bits are used in the design of this electronic part. This device has been designed with 20 terminations available. The device works with a voltage of 5V for its supply voltage. 20 pins are available on it. It is a member of the HCT family of electronic devices. The pin configuration of the device is 20. This electronic part is mounted in the way of Surface Mount. As far as ports are concerned, this device has 2 ports. Subcategory FF/Latches contains this part. It operates from 5V power supplies. The supply voltage should be maintained at 5V for high efficiency. The circuit's superior flexibility is achieved through the use of 8 circuits. There is 6mA low level output current set. It has been set to -6mA for the high level output current. Operating temperatures should be below 85°C. Temperatures above -40°C should be used. 5.5V is the maximum voltage it supports. In order for the machine to operate, the supply voltage must be 4.5V. There is a logic IC that it uses that is a BUS DRIVER. With an output current of 6mA, it is highly flexible in terms of design.
SN74HCT373DWG4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74HCT373DWG4 Applications
There are a lot of Texas Instruments SN74HCT373DWG4 Latches applications.
- PCs and Notebooks
- Accumulator Registers
- Automotive Cluster
- Counter control
- Relay replacement
- Up-Down Johnson
- Frequency dividing
- Buffer/Storage Registers
- Meter applications
- Parallel data storage