SN74HCT373DWR
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 65 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
SN74HCT373DWR Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it can be found as an embedded module. A package of Tape & Reel (TR) has been used. There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. In the 74HCT series, this FPGA is located. There are 8 bits in this electronic part. A device such as this has 20 terminations designed. 74HCT373 is the family name of it. The supply voltage of the device is 5V. The device is equipped with 20 pins. It is a member of the HCT family of electronic devices. 20 pins are used in its design. This electronic part is mounted in the way of Surface Mount. This device has 2 ports. Subcategory FF/Latches includes this part. The system is powered by 5V sources. It contains 3 input lines where electronic circuits are present. On the basis of its reliability, this device is well suited for TR. Due to its 6mA output current, it offers maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. It consumes 8μA current from its quiescent state without being affected by external factors at all. 8 circuits are used to achieve superior flexibility.
SN74HCT373DWR Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
SN74HCT373DWR Applications
There are a lot of Texas Instruments SN74HCT373DWR Latches applications.
- Frequency
- Decade counting
- Meter applications
- Data acquisition
- Counter timers
- Automotive Infotainment
- Frequency dividing
- Hammer Device Information
- Pseudo-random code generators
- Shift left with parallel loading
