SN74HCT373DWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Ports | 2 |
| Current - Output | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 47 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| High Level Output Current | -6mA |
| Low Level Output Current | 6mA |
| Control Type | ENABLE LOW/HIGH |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HCT373DWRE4 Overview
In the SOIC package, it is embedded. A Tape and Reel package is used to package it. It is designed with 8 bits. In this device, there are 20 terminations. It operates with a supply voltage of 5V. 20 pins are available on it. In terms of electronic devices, this one is in the HCT family. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. 2 ports are available on this device. It belongs to the subcategory of FF/Latches. There is 5V power supply for it. This device is well suited for TR based on its reliable performance. Optimal efficiency requires 5V as the supply voltage. To achieve its exceptional flexibility, it relies on 8 circuits. 6mA represents the low level output current. -6mA represents the high level output current. Operating temperatures should be below 85°C. A temperature greater than -40°C should be used for operation. The supply voltage is limited to 5.5V. A voltage of 4.5V is the minimum supply voltage required for it to operate. The logic IC it adopts is BUS DRIVER. The 6mA output current gives it maximum design flexibility.
SN74HCT373DWRE4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74HCT373DWRE4 Applications
There are a lot of Texas Instruments SN74HCT373DWRE4 Latches applications.
- Display
- Communication systems
- Display driver
- Meter applications
- Counting
- Instrumentation
- General-Purpose Register
- Parallel data synchronization
- Parallel data storage
- A/D converters
