SN74HCT373DWRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 65 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| High Level Output Current | -6mA |
| Low Level Output Current | 6mA |
| Independent Circuits | 1 |
| Height | 2.35mm |
| Length | 12.8mm |
| Width | 7.52mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HCT373DWRG4 Overview
Package SOIC includes it. The package is in the form of Tape and Reel. 8 Bits are used in the design of this electronic part. This device has 20 terminations. The supply voltage of the device is 5V. 20 pins are available on it. It is a member of the HCT family of electronic devices. The pin configuration of the device is 20. Surface Mount is used to mount this electronic part. This device is equipped with 2 ports. The part is in the FF/Latches subcategory. A total of 5V power supplies are needed to run it. High efficiency requires maintaining the supply voltage at 5V. Its superior flexibility is achieved by using 8 circuits. There is 6mA low level output current set. The high level output current is set to -6mA. Lower than 85°C is the recommended operating temperature. Temperatures above -40°C should be used. It is capable of providing a maximum supply voltage of 5.5V. With a minimum supply voltage of 4.5V, it operates. A logic IC that is used in this application is BUS DRIVER. Its 6mA output current allows for maximum design flexibility.
SN74HCT373DWRG4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
SN74HCT373DWRG4 Applications
There are a lot of Texas Instruments SN74HCT373DWRG4 Latches applications.
- Parallel Output
- Address register
- Display driver
- Shift left register
- Relay
- Serial Output Data Queuing
- TV Set-top Boxes
- Control circuits
- Automotive ADAS
- Relay replacement
