banner_page

SN74HCT373NSR

D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT373 20 Pins DUAL CMOS 20-SOIC (0.209, 5.30mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HCT373NSR
  • Package: 20-SOIC (0.209, 5.30mm Width)
  • Datasheet: -
  • Stock: 713
  • Description: D-Type, Latch 4.5V~5.5V 8 Bits Tri-State Latches 74HCT Series 74HCT373 20 Pins DUAL CMOS 20-SOIC (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 6 days ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.209, 5.30mm Width)
Number of Pins 20
Weight 266.712314mg
Operating Temperature -40°C~85°C
Packaging Cut Tape (CT)
Series 74HCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
ECCN Code EAR99
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Base Part Number 74HCT373
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Output Current 6mA
Number of Bits 8
Propagation Delay 65 ns
Quiescent Current 8μA
Turn On Delay Time 25 ns
Family HCT
Logic Function D-Type, Latch
Current - Output High, Low 6mA 6mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.006 A
Prop. Delay@Nom-Sup 44 ns
Control Type ENABLE LOW
Number of Input Lines 3
Independent Circuits 1
Count Direction UNIDIRECTIONAL
Height 2mm
Length 12.6mm
Width 5.3mm
Thickness 1.95mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

SN74HCT373NSR Overview


In the 20-SOIC (0.209, 5.30mm Width) package, it is embedded. A package of Cut Tape (CT) has been used. It uses the output configuration Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. The supply voltage of the device is 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. In the 74HCT series, this FPGA is located. It is designed with 8 bits. A device with this design has 20 terminations. The family it belongs to is 74HCT373. A 5V voltage supply is required for operation. 20 pins are included. In terms of electronic devices, this one is in the HCT family. The pin configuration of the device is 20. Electronic parts are mounted using the Surface Mount method. This device has 2 ports. The part belongs to the FF/Latches subcategory. There is 5V power supply for it. Electronic circuits comprise 3 input lines. The reliability of this device makes it well suited to TR. It features maximum flexibility in design due to 6mA output current. The supply voltage should be maintained at 5V for high efficiency. It consumes 8μA of quiescent current without being affected by external factors.

SN74HCT373NSR Features


20-SOIC (0.209, 5.30mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies

SN74HCT373NSR Applications


There are a lot of Texas Instruments SN74HCT373NSR Latches applications.

  • Buffer register
  • High-speed logic
  • Serial Input
  • Digital bus buffer
  • Automotive Body Electronics
  • Motor Drives
  • Counting
  • Lamp and Display (LED)
  • Avionics
  • Registers

Write a review

Note: HTML is not translated!
    Bad           Good