SN74HCT373PW
| Parameters | |
|---|---|
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 65 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| Control Type | ENABLE LOW |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
SN74HCT373PW Overview
In the 20-TSSOP (0.173, 4.40mm Width) package, it is embedded. Tube is the way in which it is packaged. It uses Tri-State as its output configuration. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. The supply voltage of the device is 4.5V~5.5V. There is -40°C~85°C operating temperature. In the 74HCT series, this FPGA is located. The design of this electronic part contains 8 bits. A device with this design has 20 terminations. 74HCT373 is its family. The device works with a voltage of 5V for its supply voltage. It is equipped with 20 pin count. It is part of the family of electronic devices called HCT. The pin configuration of the device is 20. The electronic part is mounted using the Surface Mount method. This device has 2 ports that can be connected to it. This part can be found within the FF/Latches subcategory. There are 5V power supplies attached to it. The output current of 6mA makes it feature maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. It consumes 8μA current from its quiescent state without being affected by external factors at all. The superior flexibility of this circuit can be attributed to the use of 8 circuits.
SN74HCT373PW Features
20-TSSOP (0.173, 4.40mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
SN74HCT373PW Applications
There are a lot of Texas Instruments SN74HCT373PW Latches applications.
- Buffer register
- Automotive Body Electronics
- Double bus register system
- Automotive Infotainment
- Counter control
- Counting
- Communication systems
- Meter applications
- Frequency
- Data acquisition
