SN74HCT373PWG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 65 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| High Level Output Current | -6mA |
| Low Level Output Current | 6mA |
| Independent Circuits | 1 |
| Height | 1.15mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HCT373PWG4 Overview
In the TSSOP package, it can be found as an embedded module. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. The device is operated when the supply voltage is set to 5V. The 20 pind are equipped with it. HCT is the family name of this electronic device. It is designed with 20 pins. Surface Mount is the method used for mounting this electronic part. This device has 2 ports on board, which are all available at the same time. The part belongs to the FF/Latches subcategory. A total of 5V power supplies are needed to run it. Based on its reliable performance, this device is well suited to TUBE. A high level of efficiency is achieved by maintaining the supply voltage at 5V. The superior flexibility of the system is achieved through its use of 8 circuits. In the low level output current, the value is set to 6mA. -6mA represents the high level output current. Lower than 85°C is the recommended operating temperature. It is recommended that the operating temperature be higher than -40°C. It supports a maximum supply voltage of 5.5V. The minimal voltage for operation is 4.5V. It uses the logic IC BUS DRIVER. The 6mA output current gives it maximum design flexibility.
SN74HCT373PWG4 Features
TSSOP package
8 Bits
20 pin count
20 pins
5V power supplies
SN74HCT373PWG4 Applications
There are a lot of Texas Instruments SN74HCT373PWG4 Latches applications.
- Up/down difference counting
- Pattern generators
- PCs and Notebooks
- Communication systems
- BCD counting
- Multi-line decoders
- Parallel data synchronization
- Frequency dividing
- Buffer Storage
- Serial Output Data Queuing
