SN74HCT373PWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 47 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT373PWT Overview
The 20-TSSOP (0.173, 4.40mm Width) package contains it. Tape & Reel (TR) is the way in which it is packaged. Tri-State is the output configured for it. In this electrical device, the logic type is D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. There is no supply voltage for this device. There is a temperature of -40°C~85°C at which the system operates. 74HCT is the series number of this FPGA. The design of this electronic part is based on 8 bits. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74HCT373. The device works with a voltage of 5V for its supply voltage. With 20 pins, it is equipped. There is a device in this electronic family called HCT. The pin configuration of the device is 20. Surface Mount is the method used for mounting this electronic part. 2 ports are available on this device. In the subcategory FF/Latches, this part belongs. It operates from 5V power supplies. Electronic circuits comprise 8 input lines. The reliability of this device makes it well suited to TR. The output current of 6mA makes it feature maximum design flexibility. A high efficiency supply voltage should be maintained at 5V.
SN74HCT373PWT Features
20-TSSOP (0.173, 4.40mm Width) package
74HCT series
8 Bits
74HCT373 family
20 pin count
20 pins
5V power supplies
SN74HCT373PWT Applications
There are a lot of Texas Instruments SN74HCT373PWT Latches applications.
- Parallel Input
- Display
- Control circuits
- Automatic test equipment
- Serial Input
- Shift right with parallel loading
- Automotive HEV/EV Powertrain
- Network Switches
- Pattern Generators
- Counter
