SN74HCT373PWTG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 47 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| High Level Output Current | -6mA |
| Low Level Output Current | 6mA |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HCT373PWTG4 Overview
The TSSOP package contains it. A package of Tape and Reel has been used. An electronic part with 8 bits is designed. This device has 20 terminations. In order to operate it, the supply voltage must be 5V. There are 20 pins on it. HCT is the family name of this electronic device. The device has 20 pins. Surface Mount is the method used for mounting this electronic part. This device has 2 ports on board, which are all available at the same time. The part belongs to the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. As a result of its reliable performance, it is well suited for TR. In order to achieve high efficiency, the supply voltage should be kept at 5V. The superior flexibility of the system is achieved through its use of 8 circuits. There is 6mA low level output current set. It is set to zero for the high level output current. There should be a temperature below 85°C at which the system is operating. Temperatures above -40°C should be used. The supply voltage is limited to 5.5V. With a minimum supply voltage of 4.5V, it operates. There is a logic IC that it uses that is a BUS DRIVER. As the output current is 6mA, the design flexibility is maximum.
SN74HCT373PWTG4 Features
TSSOP package
8 Bits
20 pin count
20 pins
5V power supplies
SN74HCT373PWTG4 Applications
There are a lot of Texas Instruments SN74HCT373PWTG4 Latches applications.
- Relay
- Pseudo-random code generators
- A/D converters
- Stacked or Push-Down Registers
- Avionics
- Control circuits
- Buffer Storage
- Shift left with parallel loading
- Accumulator Registers
- Synchronous frequency dividers
