SN74HCT541PWT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH DUAL OUTPUT ENABLE |
| Subcategory | Bus Driver/Transceivers |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT541 |
| Pin Count | 20 |
| Number of Outputs | 8 |
| Output Type | 3-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 30 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 50 ns |
| Family | HCT |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | Buffer, Non-Inverting |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 29 ns |
| Control Type | ENABLE LOW |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT541PWT Overview
Logical driver uses a neat 20-TSSOP (0.173, 4.40mm Width) package. Tape & Reel (TR) external packaging. Available in Surface Mount. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.5V~5.5V. Qualified to operate within -40°C~85°C TA. The high and low logic state output current of logical driver is 6mA 6mA. Logical driver can deal with 3-State output (s). All of the 1 elements are put into use. Digital buffer is one of the 74HCT series devices. 20 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a HCT family part that is attached to this electronic component. 20 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 20 pins. Enhanced with 2 ports. You can search "74HCT541" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 8μA. It is recommended to use a 5V power supply. It is generally sold in TR package. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 8 bits are included within the electrical component. Logical driver features WITH DUAL OUTPUT ENABLE to better serve the need. 8 channels for high quality communication. It is sufficient to make 8 outputs.
SN74HCT541PWT Features
Bus Driver/Transceivers
WITH DUAL OUTPUT ENABLE
SN74HCT541PWT Applications
There are a lot of Texas Instruments SN74HCT541PWT Buffers & Transceivers applications.
- Switching system
- Fast Ethernet
- Changeing the frequency from IF to RF
- Wireless modems
- Shortwave receiver
- Cable network front end
- transmission relay
- Solenoids
- Wireless multimedia center in smart home
- Remote controls
