SN74HCT573DWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 65 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 3 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT573DWR Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). A package of Tape & Reel (TR) has been used. In this configuration, the output is set to Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The electronic component is mounted according to the Surface Mount method. A 4.5V~5.5V voltage supply is required for operation. During operation, the temperature is set at -40°C~85°C. The 74HCT series is associated with this FPGA. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. 74HCT573 is its family. A 5V voltage supply is required for operation. 20 pins are provided. This electronic device is categorized as a HCT electronic device. The device has 20 pins. Surface Mount is the method used for mounting this electronic part. This device has 2 ports on board, which are all available at the same time. FF/Latches is the subcategory of this part. A total of 5V power supplies are required for it to operate. Electronic circuits comprise 3 input lines. Based on its reliable performance, this device is suitable for TR. The 6mA output current gives it maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. There are no external factors that affect it, so it consumes 8μA quiescent current. 8 circuits are used to achieve superior flexibility.
SN74HCT573DWR Features
20-SOIC (0.295, 7.50mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
5V power supplies
SN74HCT573DWR Applications
There are a lot of Texas Instruments SN74HCT573DWR Latches applications.
- A/D converters
- Display
- Motor Drives
- BCD counting
- Multistage ripple counting
- Automotive HEV/EV Powertrain
- Watches
- Counter timers
- Buffer register
- Parallel data storage
