SN74HCT573NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 65 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 2mm |
| Length | 12.6mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT573NSR Overview
In the package 20-SOIC (0.209, 5.30mm Width), it can be found. It is packaged in the way of Tape & Reel (TR). It is configured with an output of Tri-State. This electrical device has Logic type D-Type Transparent Latch. According to Surface Mount, this electronic part is mounted. There is no supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. The 74HCT series of FPGAs is the one this FPGA belongs to. 8 Bits are used in the design of this electronic part. A device such as this has 20 terminations designed. The family 74HCT573 includes it. In order to function, the supply voltage should be set to 5V. With 20 pins, it is equipped. There is a device in this electronic family called HCT. In addition, it is designed with a pin number of 20. Mounting this electronic component follows the Surface Mount method. This device has 2 ports that can be connected to it. It belongs to the subcategory of FF/Latches. There are 5V power supplies required for this machine to operate. Electronic circuits comprise 8 input lines. On the basis of its reliability, this device is well suited for TR. The output current of 6mA makes it feature maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. Without external influences, it consumes 8μA of quiescent current.
SN74HCT573NSR Features
20-SOIC (0.209, 5.30mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
5V power supplies
SN74HCT573NSR Applications
There are a lot of Texas Instruments SN74HCT573NSR Latches applications.
- Audio and video switching
- Buffer register
- Digital bus buffer
- Parallel Output
- Frequency dividing
- Display
- Buffer/Storage Registers
- Automotive Body Electronics
- BCD counting
- Four-bit storage with output enable
