SN74HCT573NSRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 47 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| High Level Output Current | -6mA |
| Low Level Output Current | 6mA |
| Independent Circuits | 1 |
| Height Seated (Max) | 2mm |
| Width | 5.3mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74HCT573NSRE4 Overview
The SOP package contains it. As a result, it has a packaging of Tape and Reel. Electronic parts with 8 bits are designed for this application. A device such as this has 20 terminations designed. In order to function, the supply voltage should be set to 5V. There are 20 pins attached to it. It is a member of the HCT family of electronic devices. In addition, it is designed with a pin number of 20. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports on board, which are all available at the same time. FF/Latches is the subcategory of this part. There are 5V power supplies required for this machine to operate. High efficiency requires maintaining the supply voltage at 5V. Its superior flexibility is achieved by using 8 circuits. 6mA is set as the low level output current. It has been set to -6mA for the high level output current. Operating temperatures should be below 85°C. -40°C is the minimum operating temperature. There is a maximum voltage supply of 5.5V that can be applied to it. This device requires a minimum voltage of 4.5V. The logic IC it adopts is BUS DRIVER. With 6mA, maximum design flexibility is ensured.
SN74HCT573NSRE4 Features
SOP package
8 Bits
20 pin count
20 pins
5V power supplies
SN74HCT573NSRE4 Applications
There are a lot of Texas Instruments SN74HCT573NSRE4 Latches applications.
- PCs and Notebooks
- A/D converters
- Parallel Input
- Stacked or Push-Down Registers
- Shift left register
- Bus system register with enable parallel lines at bus side
- Hammer
- Network Switches
- Automotive Cluster
- Automotive Body Electronics
