Parameters |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
20 |
Weight |
76.997305mg |
Packaging |
Rail/Tube |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FF/Latches |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Pin Count |
20 |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Number of Circuits |
8 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Current - Output |
6mA |
Number of Bits |
8 |
Propagation Delay |
47 ns |
Turn On Delay Time |
25 ns |
Family |
HCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.006 A |
Prop. Delay@Nom-Sup |
44 ns |
High Level Output Current |
-6mA |
Low Level Output Current |
32mA |
Independent Circuits |
1 |
Height |
1.15mm |
Length |
6.5mm |
Width |
4.4mm |
Radiation Hardening |
No |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74HCT573PWG4 Overview
There is an embedded version of it in package TSSOP. It is packaged in the way of Rail/Tube. With this electronic part, there are 8 bits. This device has 20 terminations. In order to function, the supply voltage should be set to 5V. 20 pins are included. In terms of electronic devices, this one is in the HCT family. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports that can be connected to it. This part can be found within the FF/Latches subcategory. A total of 5V power supplies are needed to run it. In order to achieve high efficiency, the supply voltage should be kept at 5V. The circuit's superior flexibility is achieved through the use of 8 circuits. 32mA represents the low level output current. -6mA is set as the high level output current. There should be a temperature below 85°C at which the system is operating. In order for the system to operate properly, the operating temperature should be higher than -40°C. There is a maximum voltage supply of 5.5V that can be applied to it. A voltage of 4.5V is the minimum supply voltage required for it to operate. It uses the logic IC BUS DRIVER. Its output current of 6mA ensures maximum design flexibility.
SN74HCT573PWG4 Features
TSSOP package
8 Bits
20 pin count
20 pins
5V power supplies
SN74HCT573PWG4 Applications
There are a lot of Texas Instruments SN74HCT573PWG4 Latches applications.
- Network Switches
- Relay
- Clocks
- Automotive Body Electronics
- Data acquisition
- Flip-flops
- Parallel data synchronization
- Instrumentation
- OC-48 communication systems
- Serial Output Data Queuing