SN74HCT573PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Propagation Delay | 65 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.006 A |
| Prop. Delay@Nom-Sup | 44 ns |
| Control Type | ENABLE LOW |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT573PWR Overview
In the package 20-TSSOP (0.173, 4.40mm Width), it can be found. The package is in the form of Tape & Reel (TR). The output it is configured with uses Tri-State. There is D-Type Transparent Latch logic type for this electrical device. A Surface Mount mount is used for mounting this electronic part. A 4.5V~5.5V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. 74HCT is the series number of this FPGA. This electronic part is designed with 8 Bits. The device consists of 20 terminations that are designed to be used in conjunction with it. It is a member of the 74HCT573 family. In order to function, the supply voltage should be set to 5V. 20 pins are provided. It is part of the family of electronic devices called HCT. 20 pins are used in its design. Electronic parts are mounted using the Surface Mount method. In this device, there is a total of 2 ports available for use. This part can be found within the FF/Latches subcategory. 5V power supplies are needed to operate it. Electronic circuits comprise 8 input lines. Based on its reliable performance, this device is suitable for TR. Its output current of 6mA ensures maximum design flexibility. The supply voltage should be maintained at 5V for high efficiency.
SN74HCT573PWR Features
20-TSSOP (0.173, 4.40mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
5V power supplies
SN74HCT573PWR Applications
There are a lot of Texas Instruments SN74HCT573PWR Latches applications.
- Relay
- Pattern generators
- Automotive ADAS
- Bus system register with enable parallel lines at bus side
- Shift left register
- Automotive Cluster
- A/D and D/A conversion
- Pattern Generators
- Parallel-to-Serial Data Conversion
- Motor Drives
