Parameters |
Mount |
Surface Mount |
Package / Case |
TSSOP |
Number of Pins |
20 |
Weight |
76.997305mg |
Packaging |
Tape and Reel |
JESD-609 Code |
e4 |
Moisture Sensitivity Level (MSL) |
1 |
Number of Terminations |
20 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Temperature Grade |
INDUSTRIAL |
Number of Circuits |
8 |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
4.5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Current - Output |
6mA |
Number of Bits |
8 |
Propagation Delay |
47 ns |
Turn On Delay Time |
25 ns |
Family |
HCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Logic IC Type |
BUS DRIVER |
Max I(ol) |
0.006 A |
Prop. Delay@Nom-Sup |
44 ns |
High Level Output Current |
-6mA |
Low Level Output Current |
32mA |
Independent Circuits |
1 |
Length |
6.5mm |
Width |
4.4mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Lead Free |
SN74HCT573PWRE4 Overview
In the TSSOP package, it can be found as an embedded module. Packaged in the way of Tape and Reel. The design of this electronic part is based on 8 bits. This device has 20 terminations. With the supply voltage set at 5V, it is able to operate. There are 20 pins on it. In the world of electronics, this electronic device belongs to the family of HCT. The device has 20 pins. It is mounted according to the Surface Mount method. This device is equipped with 2 ports. In the subcategory FF/Latches, this part belongs. There are 5V power supplies attached to it. The device's reliable performance makes it a good choice for TR. A high efficiency supply voltage should be maintained at 5V. 8 circuits enable it to achieve high performance. The low level output current is set to 32mA. -6mA is set as the high level output current. It is recommended to work at a temperature lower than 85°C. Temperatures above -40°C should be used. Voltages up to 5.5V can be supplied. A voltage of 4.5V is the minimum supply voltage required for it to operate. As for the logic IC it uses, it is a BUS DRIVER. Due to its 6mA output current, it offers maximum design flexibility.
SN74HCT573PWRE4 Features
TSSOP package
8 Bits
20 pin count
20 pins
5V power supplies
SN74HCT573PWRE4 Applications
There are a lot of Texas Instruments SN74HCT573PWRE4 Latches applications.
- BCD counting
- Display
- Shift register
- Automotive ADAS
- Shift right register
- Counting
- Flip-flops
- Digital bus buffer
- Registers
- Timers