banner_page

SN74HCT573PWRG4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-SN74HCT573PWRG4
  • Package: TSSOP
  • Datasheet: -
  • Stock: 224
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS TSSOP(Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case TSSOP
Number of Pins 20
Weight 76.997305mg
Packaging Tape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Packing Method TR
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Pin Count 20
Operating Supply Voltage 5V
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Load Capacitance 50pF
Number of Ports 2
Current - Output 6mA
Number of Bits 8
Propagation Delay 47 ns
Turn On Delay Time 25 ns
Family HCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.006 A
Prop. Delay@Nom-Sup 44 ns
High Level Output Current -6mA
Low Level Output Current 6mA
Independent Circuits 1
Height 1.15mm
Length 6.5mm
Width 4.4mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74HCT573PWRG4 Overview


In the TSSOP package, it can be found as an embedded module. A Tape and Reel package is used to package it. The design of this electronic part is based on 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It operates with a supply voltage of 5V. The device is equipped with 20 pins. It is part of the family of electronic devices called HCT. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In the subcategory FF/Latches, this part belongs. It operates from 5V power supplies. Based on its reliable performance, this device is well suited to TR. For maximum efficiency, the supply voltage should be set to 5V. Its superior flexibility is achieved by using 8 circuits. There is 6mA output current at the low level. There is -6mA high level output current set. It is recommended to work at a temperature lower than 85°C. A temperature greater than -40°C should be used as the operating temperature. Voltages up to 5.5V can be supplied. This device requires a minimum voltage of 4.5V. It uses a logic IC of type BUS DRIVER. Its output current of 6mA ensures maximum design flexibility.

SN74HCT573PWRG4 Features


TSSOP package
8 Bits
20 pin count
20 pins
5V power supplies

SN74HCT573PWRG4 Applications


There are a lot of Texas Instruments SN74HCT573PWRG4 Latches applications.

  • Display driver
  • Counter
  • Serial Input
  • Parallel Output
  • Pattern Generators
  • Address register
  • Decade counting
  • A/D and D/A conversion
  • Frequency
  • Accumulator Registers

Write a review

Note: HTML is not translated!
    Bad           Good