SN74HCT574DW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Clock Frequency | 40MHz |
| Propagation Delay | 53 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 47ns @ 5.5V, 150pF |
| Prop. Delay@Nom-Sup | 45 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 27000000Hz |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT574DW Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. The Tubepackage contains it. It is configured with Tri-State, Non-Invertedas an output. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Currently, the operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. This D flip flop should not have a frequency greater than 40MHz. In total, it contains 1 elements. This process consumes 8μA quiescents. A total of 20 terminations have been made. You can search similar parts based on 74HCT574. The D flip flop is powered by a voltage of 5V . The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Electronic devices of this type belong to the HCTfamily. Surface Mount mounts this electronic component. With its 20pins, it is designed to work with most electronic flip flops. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in Bus Driver/Transceiver. This flip flop is designed with 8 Bits. It operates from 5V power supplies. A D flip flop with 2embedded ports is available. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The 6mA output current allows it to be designed with the greatest amount of flexibility. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. There are 8 channels available.
SN74HCT574DW Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
SN74HCT574DW Applications
There are a lot of Texas Instruments SN74HCT574DW Flip Flops applications.
- Control circuits
- Cold spare funcion
- Common Clocks
- Pattern generators
- Data transfer
- Matched Rise and Fall
- Dynamic threshold performance
- Shift registers
- Guaranteed simultaneous switching noise level
- Power down protection
