SN74HCT574PW
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 6mA |
| Number of Bits | 8 |
| Clock Frequency | 40MHz |
| Propagation Delay | 53 ns |
| Turn On Delay Time | 25 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 6mA 6mA |
| Max I(ol) | 0.006 A |
| Max Propagation Delay @ V, Max CL | 47ns @ 5.5V, 150pF |
| Prop. Delay@Nom-Sup | 45 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 27000000Hz |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
SN74HCT574PW Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tube. It is configured with Tri-State, Non-Invertedas an output. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. It belongs to the 74HCTseries of FPGAs. Its output frequency should not exceed 40MHz Hz. A total of 1 elements are present. As a result, it consumes 8μA of quiescent current without being affected by external factors. Currently, there are 20 terminations. Members of the 74HCT574family make up this object. It is powered by a voltage of 5V . This T flip flop has a capacitance of 3pF farads at the input. In this case, the D flip flop belongs to the HCTfamily. A part of the electronic system is mounted in the way of Surface Mount. A total of 20pins are provided on this board. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. The design is based on 8bits. Using 8 circuits, it is highly flexible. There are 5V power supplies attached to it. This D flip flop is equipped with 0 ports. For high efficiency, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 6mA . Currently, there are 3 lines of input.
SN74HCT574PW Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
SN74HCT574PW Applications
There are a lot of Texas Instruments SN74HCT574PW Flip Flops applications.
- Storage Registers
- Matched Rise and Fall
- QML qualified product
- Event Detectors
- Common Clocks
- Computers
- Frequency division
- Counters
- Buffer registers
- ATE
