SN74HCT74N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 927.99329mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 46MHz |
| Propagation Delay | 28 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 25ns @ 5.5V, 50pF |
| Prop. Delay@Nom-Sup | 35 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT74N Overview
14-DIP (0.300, 7.62mm)is the packaging method. It is included in the package Tube. As configured, the output uses Differential. Positive Edgeis the trigger it is configured with. Through Holeis in the way of this electric part. With a supply voltage of 4.5V~5.5V volts, it operates. Currently, the operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. It should not exceed 46MHzin its output frequency. 14terminations have occurred. The 74HCT74 family contains this object. It is powered from a supply voltage of 5V. Its input capacitance is 3pF farads. This D flip flop belongs to the family of HCT. This electronic part is mounted in the way of Through Hole. With its 14pins, it is designed to work with most electronic flip flops. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in FF/Latches. There are 5V power supplies attached to it. The supply voltage should be maintained at 5V for high efficiency. As a result of its output current of 4mA, it is very flexible in terms of design. The number of input lines is 4. 4μAquiescent current consumed. Currently, there are 2 channels available.
SN74HCT74N Features
Tube package
74HCT series
14 pins
5V power supplies
SN74HCT74N Applications
There are a lot of Texas Instruments SN74HCT74N Flip Flops applications.
- Dynamic threshold performance
- Data Synchronizers
- Shift registers
- Load Control
- Count Modes
- Functionally equivalent to the MC10/100EL29
- Automotive
- Frequency Dividers
- Latch
- Digital electronics systems
