SN74HCT74NSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Weight | 208.312296mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 46MHz |
| Propagation Delay | 28 ns |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 25ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 35 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2mm |
| Length | 10.3mm |
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT74NSR Overview
The item is packaged in 14-SOIC (0.209, 5.30mm Width)cases. Package Tape & Reel (TR)embeds it. Differentialis the output configured for it. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. The FPGA belongs to the 74HCT series. A frequency of 46MHzshould not be exceeded by its output. There is a consumption of 4μAof quiescent energy. Terminations are 14. The 74HCT74family includes it. Power is provided by a 5V supply. A JK flip flop with a 3pFfarad input capacitance is used here. Devices in the HCTfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. Its superior flexibility is attributed to its use of 2 circuits. Considering its reliability, this T flip flop is well suited for TR. The power supply is 5V. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. A total of 4input lines have been provided.
SN74HCT74NSR Features
Tape & Reel (TR) package
74HCT series
14 pins
5V power supplies
SN74HCT74NSR Applications
There are a lot of Texas Instruments SN74HCT74NSR Flip Flops applications.
- Event Detectors
- Storage registers
- Shift Registers
- Data storage
- ESD performance
- Buffered Clock
- Frequency Dividers
- ATE
- Communications
- Cold spare funcion
