SN74HCT74PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latch |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74HCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 46MHz |
| Propagation Delay | 44 ns |
| Turn On Delay Time | 18 ns |
| Family | HCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 25ns @ 5.5V, 50pF |
| Prop. Delay@Nom-Sup | 35 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HCT74PW Overview
As a result, it is packaged as 14-TSSOP (0.173, 4.40mm Width). The Tubepackage contains it. As configured, the output uses Differential. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. It is a type of FPGA belonging to the 74HCT series. Its output frequency should not exceed 46MHz Hz. As a result, it consumes 4μA of quiescent current without being affected by external factors. 14terminations have occurred. You can search similar parts based on 74HCT74. Power is supplied from a voltage of 5V volts. A 3pFfarad input capacitance is provided by this T flip flop. It belongs to the family of electronic devices known as HCT. Surface Mount mounts this electronic component. With its 14pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchfor the RS flip flops. It operates from 5V power supplies. For high efficiency, the supply voltage should be kept at 5V. Its output current of 4mAallows for maximum design flexibility. Currently, there are 4 lines of input. There are 2 channels available.
SN74HCT74PW Features
Tube package
74HCT series
14 pins
5V power supplies
SN74HCT74PW Applications
There are a lot of Texas Instruments SN74HCT74PW Flip Flops applications.
- Computing
- EMI reduction circuitry
- High Performance Logic for test systems
- Patented noise
- Matched Rise and Fall
- QML qualified product
- Event Detectors
- Buffered Clock
- Control circuits
- Frequency Dividers
