SN74HSTL162822DGGR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 64 |
| Weight | 262.601633mg |
| Operating Temperature | -40°C~90°C |
| Packaging | Cut Tape (CT) |
| Series | 74HSTL |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| Subcategory | FF/Latches |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74HSTL162822 |
| Pin Count | 64 |
| Output Type | Tri-State |
| Circuit | 14:28 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.45V |
| Power Supplies | 3.3V |
| Nominal Supply Current | 100mA |
| Output Current | 12mA |
| Number of Bits | 14 |
| Propagation Delay | 5 ns |
| Quiescent Current | 50mA |
| Turn On Delay Time | 1.7 ns |
| Family | TTL/H/L |
| Logic Function | AND, D-Type, Transceiver |
| Output Characteristics | SERIES-RESISTOR |
| Current - Output High, Low | 12mA 12mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Number of Input Lines | 14 |
| Independent Circuits | 1 |
| Number of Output Lines | 28 |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HSTL162822DGGR Overview
A package called 64-TFSOP (0.240, 6.10mm Width) contains it. Packaged in the way of Cut Tape (CT). There is a Tri-State output configured. There is a logic type of D-Type, Addressable associated with this electrical device. According to Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 3.15V~3.45V. A temperature of -40°C~90°C is set as the operating temperature. An FPGA of this type belongs to the 74HSTL series. 14 Bits are used in the design of this electronic part. This device is designed with 64 terminations. As a member of the 74HSTL162822 family, it falls under that category. In order to operate it, the supply voltage must be 3.3V. 64 pins are provided. TTL/H/L is the family of this electronic device. 64 pins are used in its design. The electronic part is mounted in a way that corresponds to Surface Mount. Subcategory FF/Latches contains this part. There is a maximum voltage supply (Vsup) that reaches 3.45V. There are 3.3V power supplies attached to it. It consists of 14 input lines from which an electronic circuit can be built. The output current of 12mA makes it feature maximum design flexibility. Regardless of the input line, the binary equivalent of the input line will be generated by the 28 output lines. There are no external factors that affect it, so it consumes 50mA quiescent current.
SN74HSTL162822DGGR Features
64-TFSOP (0.240, 6.10mm Width) package
74HSTL series
14 Bits
74HSTL162822 family
64 pin count
64 pins
3.3V power supplies
SN74HSTL162822DGGR Applications
There are a lot of Texas Instruments SN74HSTL162822DGGR Latches applications.
- Meter applications
- Display
- TV Set-top Boxes
- Automotive HEV/EV Powertrain
- Avionics
- Timers
- Flip-flops
- High-speed logic
- Buffer/Storage Registers
- Four-bit storage with output enable
