SN74HSTL16918DGGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Number of Pins | 48 |
| Weight | 223.195796mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Cut Tape (CT) |
| Series | 74HSTL |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Voltage - Supply | 3.15V~3.45V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74HSTL16918 |
| Pin Count | 48 |
| Output Type | Tri-State |
| Operating Supply Voltage | 3.3V |
| Circuit | 9:18 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 3.45V |
| Number of Circuits | 2 |
| Nominal Supply Current | 100mA |
| Output Current | 24mA |
| Number of Bits | 18 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 50mA |
| Turn On Delay Time | 1.9 ns |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type, Addressable |
| Trigger Type | LOW LEVEL |
| Number of Input Lines | 9 |
| Independent Circuits | 1 |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.1mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74HSTL16918DGGR Overview
It is embedded in the 48-TFSOP (0.240, 6.10mm Width) package. A package of Cut Tape (CT) has been used. Tri-State is the output configured for it. There is D-Type, Addressable logic type for this electrical device. Electronic components are mounted using the Surface Mount method. There is no supply voltage for this device. During operation, the temperature is set at 0°C~70°C. An FPGA of this type belongs to the 74HSTL series. The electronic part in this image has 18 bits. This device has 48 terminations. 74HSTL16918 is its family. With the supply voltage set at 3.3V, it is able to operate. The 48 pind are equipped with it. With the design of the board, there are only 48 pins. Surface Mount is used to mount this electronic part. In the subcategory FF/Latches, this part belongs. During this period, the maximum supply voltage (Vsup) reaches 3.45V. Electronic circuits comprise 9 input lines. As a result of its reliable performance, it is well suited for TR. With 24mA, maximum design flexibility is ensured. Optimal efficiency requires 3.3V as the supply voltage. As far as external factors are concerned, it consumes 50mA of quiescent current without getting affected by them. The circuit's superior flexibility is achieved through the use of 2 circuits.
SN74HSTL16918DGGR Features
48-TFSOP (0.240, 6.10mm Width) package
74HSTL series
18 Bits
74HSTL16918 family
48 pin count
48 pins
SN74HSTL16918DGGR Applications
There are a lot of Texas Instruments SN74HSTL16918DGGR Latches applications.
- Shift left register
- High-speed logic
- Counters
- Watches
- Parallel Output
- Storage
- A/D converters
- Display
- TV Set-top Boxes
- Programmable binary
