SN74LS07DG4
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Gates |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 6 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 6 |
| Polarity | Non-Inverting |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 30 ns |
| Family | LS |
| Logic Function | Buffer, Inverting |
| Output Characteristics | OPEN-COLLECTOR |
| Max I(ol) | 0.04 A |
| Number of Bits per Element | 1 |
| High Level Output Current | -250μA |
| Low Level Output Current | 40mA |
| Schmitt Trigger | NO |
| Power Supply Current-Max (ICC) | 45mA |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
SN74LS07DG4 Overview
Logical driver uses a neat SOIC package. Rail/Tube external packaging. All of the 6 elements are put into use. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. There is a LS family part that is attached to this electronic component. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Gates. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as 0°C. Digital buffer should operate with ambient temperature no higher than 70°C. Buffer driver outputs 40mA to its low level. In high level output mode, the electronic parts may conduct -250μA of current. Voltage used to run voltage buffer should be 4.75V at least. In regard to the maximum supply voltage, buffer driver is rated 5.25V.
SN74LS07DG4 Features
Gates
High Level Output: 40mA
Low Level Output: -250μA
SN74LS07DG4 Applications
There are a lot of Texas Instruments SN74LS07DG4 Buffers & Transceivers applications.
- Televisions
- Broadcast application
- Data center
- Satellite communication
- Car radio
- Shortwave receiver
- Tuner
- Clock radio
- Digital systems
- 1x/2x Fiber Channel
