SN74LS07NE4
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 14 |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Number of Terminations | 14 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Gates |
| Technology | TTL |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 6 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 6 |
| Polarity | Non-Inverting |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Power Dissipation-Max | 140mW |
| Propagation Delay | 30 ns |
| Turn On Delay Time | 30 ns |
| Family | LS |
| Logic Function | Buffer, Inverting |
| Output Characteristics | OPEN-COLLECTOR |
| Max I(ol) | 0.04 A |
| Number of Bits per Element | 1 |
| High Level Output Current | -250μA |
| Low Level Output Current | 40mA |
| Schmitt Trigger | NO |
| Power Supply Current-Max (ICC) | 45mA |
| Height Seated (Max) | 5.08mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS07NE4 Overview
Logical driver uses a neat PDIP package. Rail/Tube external packaging. All of the 6 elements are put into use. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This buffer driver is part of the LS family of parts. 14 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 14 pins. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Gates. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as 0°C. Digital buffer should operate with ambient temperature no higher than 70°C. Buffer driver outputs 40mA to its low level. In high level output mode, the electronic parts may conduct -250μA of current. Voltage used to run voltage buffer should be 4.75V at least. In regard to the maximum supply voltage, buffer driver is rated 5.25V.
SN74LS07NE4 Features
Gates
High Level Output: 40mA
Low Level Output: -250μA
SN74LS07NE4 Applications
There are a lot of Texas Instruments SN74LS07NE4 Buffers & Transceivers applications.
- Desktop PC
- Structural bonding
- Transmission stations
- Precision geodetic measurement
- Digital systems
- Solenoids
- Wireless communication
- Thermal management
- Radio transmission
- Wireless teaching
