SN74LS112ANSR
| Parameters | |
|---|---|
| Width | 5.3mm |
| Thickness | 1.95mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74LS112 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Output Current | 8mA |
| Clock Frequency | 45MHz |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 15 ns |
| Family | LS |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Quiescent (Iq) | 6mA |
| Current - Output High, Low | 400μA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 15pF |
| Trigger Type | Negative Edge |
| Schmitt Trigger | No |
| Power Supply Current-Max (ICC) | 6mA |
| Number of Input Lines | 5 |
| Clock Edge Trigger Type | Negative Edge |
| Max Frequency@Nom-Sup | 30000000Hz |
| Height | 2mm |
| Length | 10.3mm |
SN74LS112ANSR Overview
16-SOIC (0.209, 5.30mm Width)is the way it is packaged. You can find it in the Tape & Reel (TR)package. There is a Differentialoutput configured with it. This trigger uses the value Negative Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis required for its operation. In the operating environment, the temperature is 0°C~70°C TA. It belongs to the type JK Typeof flip flops. It belongs to the 74LSseries of FPGAs. You should not exceed 45MHzin its output frequency. As a result, it consumes 6mA quiescent current. It has been determined that there have been 16 terminations. The 74LS112 family contains it. A voltage of 5V is used as the power supply for this D latch. The electronic device belongs to the LSfamily. It is mounted by the way of Surface Mount. A total of 16pins are provided on this board. This device has Negative Edgeas its clock edge trigger type. The part you are looking for is included in FF/Latches. The superior flexibility is achieved through the use of 2 circuits. Due to its reliability, this T flip flop is well suited for TR. The system runs on a power supply of 5V watts. Optimal efficiency requires a supply voltage of 5V. It offers maximum design flexibility with its output current of 8mA. A total of 5input lines have been provided.
SN74LS112ANSR Features
Tape & Reel (TR) package
74LS series
16 pins
5V power supplies
SN74LS112ANSR Applications
There are a lot of Texas Instruments SN74LS112ANSR Flip Flops applications.
- ESD performance
- Set-reset capability
- Computers
- Data Synchronizers
- Functionally equivalent to the MC10/100EL29
- Balanced Propagation Delays
- Matched Rise and Fall
- Reduced system switching noise
- Dynamic threshold performance
- Frequency Divider circuits
