SN74LS125ADRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 14 |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Bus Driver/Transceivers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Pin Count | 14 |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of Ports | 2 |
| Propagation Delay | 18 ns |
| Turn On Delay Time | 18 ns |
| Family | LS |
| Logic Function | Buffer, Inverting |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Number of Bits per Element | 1 |
| High Level Output Current | -2.6mA |
| Low Level Output Current | 24mA |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 20mA |
| Height | 1.58mm |
| Length | 8.65mm |
| Width | 3.91mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS125ADRG4 Overview
Logical driver uses a neat SOIC package. Tape and Reel external packaging. All of the 4 elements are put into use. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. This buffer driver is part of the LS family of parts. 14 pins are set with the electric part. Buffer IC is suitable for Surface Mount applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. Voltage buffer is capable of operating under temperature as low as 0°C. Digital buffer should operate with ambient temperature no higher than 70°C. Buffer driver outputs 24mA to its low level. In high level output mode, the electronic parts may conduct -2.6mA of current. Voltage used to run voltage buffer should be 4.75V at least. In regard to the maximum supply voltage, buffer driver is rated 5.25V. It is known as a BUS DRIVER logic IC.
SN74LS125ADRG4 Features
Bus Driver/Transceivers
High Level Output: 24mA
Low Level Output: -2.6mA
BUS DRIVER Logic IC
SN74LS125ADRG4 Applications
There are a lot of Texas Instruments SN74LS125ADRG4 Buffers & Transceivers applications.
- Satellite ground stations
- Structural bonding
- Long-distance fiber optic network applications
- Indoor ad hoc meeting
- Home theater wiring-free
- Low power, low voltage systems
- Wireless modems
- Automation systems
- Data center
- Tuner
