SN74LS125AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 21 hours ago) |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Termination | Through Hole |
| ECCN Code | EAR99 |
| Subcategory | Bus Driver/Transceivers |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74LS125 |
| Pin Count | 14 |
| Output Type | 3-State |
| Max Output Current | 16mA |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Number of Ports | 2 |
| Nominal Supply Current | 32mA |
| Output Current | 24mA |
| Propagation Delay | 18 ns |
| Quiescent Current | 11mA |
| Turn On Delay Time | 18 ns |
| Family | LS |
| Logic Function | Buffer, Inverting |
| Current - Output High, Low | 2.6mA 24mA |
| Logic Type | Buffer, Non-Inverting |
| Number of Bits per Element | 1 |
| Control Type | ENABLE LOW |
| Power Supply Current-Max (ICC) | 20mA |
| Number of Output Lines | 4 |
| Count Direction | UNIDIRECTIONAL |
| Schmitt Trigger Input | No |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS125AN Overview
Logical driver uses a neat 14-DIP (0.300, 7.62mm) package. Tube external packaging. Available in Through Hole. Voltage buffer adopts Buffer, Non-Inverting logic prototype. Buffer IC is fed with a voltage of 4.75V~5.25V. Qualified to operate within 0°C~70°C TA. The high and low logic state output current of logical driver is 2.6mA 24mA. Logical driver can deal with 3-State output (s). Digital buffer is one of the 74LS series devices. 14 terminations with different functions. Buffer IC reuqires a supply voltage of 5V. In the LS family, the electric component belongs. 14 pins are set with the electric part. Buffer IC is suitable for Through Hole applications. Logical driver has 14 pins. Enhanced with 2 ports. The bus transceiver employs 1 bits for each element. You can search "74LS125" for other related electrical components. Specifically, digital transciever is a kind of Bus Driver/Transceivers. The digital buffer starts up under ENABLE LOW control technology. In quiescent state, the electronic part uses 11mA. It is recommended to use a 5V power supply. To run the part safely and stably in a circuit, 5V recommends users apply 5V on the logical driver. 4 channels for high quality communication. Wireless transceiver is able to output 4 lines. Does the electronic component support schmitt trigger input? No. The typical output current of the logical driver is measured 24mA.
SN74LS125AN Features
Bus Driver/Transceivers
SN74LS125AN Applications
There are a lot of Texas Instruments SN74LS125AN Buffers & Transceivers applications.
- LAN, SAN, WAN (local, storage, work area networks)
- Sensor reporting
- Wireless 3D game
- Military satellite communications
- Fiber-to-the-desktop
- Cable network front end
- VoIP phones
- Fast Ethernet
- Digital systems
- Wireless HD Photography
