SN74LS138NSRG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SOP |
| Number of Pins | 16 |
| Weight | 200.686274mg |
| Packaging | Tape and Reel |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Decoder/Drivers |
| Technology | TTL |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Propagation Delay | 41 ns |
| Turn On Delay Time | 41 ns |
| Family | LS |
| Logic Function | Decoder, Demultiplexer |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Logic IC Type | OTHER DECODER/DRIVER |
| High Level Output Current | -400μA |
| Low Level Output Current | 8mA |
| Number of Input Lines | 3 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
SN74LS138NSRG4 Overview
Due to the fact that it is provided in the SOP, digital switch allows the board to be compacted.The package is packaged in accordance with Tape and Reel.There is a design for terminating 16 as part of its basic configuration.The multiplexer's system is powered by 5V voltage.There are 16 component pins in this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.Currently, it is configured with 16 pins.As you can see, it is mounted in the direction of Surface Mount.Among the family of LS the logic switch is a member.For mux switch's normal operation, there is a power supply provided at 5V.This is a signal switch that is categorized as Decoder/Drivers.Supply voltages of 5V can provide reliable performance of the multiplexers.It is possible to accept voltage levels by using one of the 3 input lines of multiplexers.As the signal source, there are 8 output lines.It is acceptable for this signal switch to operate at the maximal temperature of 70°C.Keeping the temperature of the multiplexer at 0°C is the minimum operating temperature.Based on the device specifications, the signal switches is designed to operate at 5.25V maximum supply voltage.A minimum supply voltage of 4.75V is specified for the digital swith in accordance with its applicable specifications.This mux switch configuration has 1 elements.In terms of logic ICs, it uses OTHER DECODER/DRIVER.
SN74LS138NSRG4 Features
Supplied in the SOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
3 input lines
8 output lines
OTHER DECODER/DRIVER as the logic IC
SN74LS138NSRG4 Applications
There are a lot of Texas Instruments SN74LS138NSRG4 Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- Relay
- Used to connect a single source to multiple destinations
- Electronic circuits
- Speed control of medern motors
- CPU memory location identification
- Analog, digital or video signal switching
- Idle motor
- Logic gates for other digital devices
- Steel plants
