SN74LS139AN
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SCHOTTKY CLAMPED FOR HIGH PERFORMANCE |
| Subcategory | Decoder/Drivers |
| Max Power Dissipation | 200mW |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74LS139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Operating Supply Current | 100μA |
| Load Capacitance | 15pF |
| Nominal Supply Current | 100μA |
| Number of Bits | 4 |
| Throw Configuration | DP4T |
| Propagation Delay | 33 ns |
| Turn On Delay Time | 38 ns |
| Family | LS |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 400μA 8mA |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Max I(ol) | 0.008 A |
| Power Supply Current-Max (ICC) | 11mA |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS139AN Overview
Providing this information in the 16-DIP (0.300, 7.62mm) enables digital switch board space to be saved.The package is in the form of Tube.Through Hole is the mounting method digital switch ic uses.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.When the operating temperature is kept at 0°C~70°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.75V~5.25V.provides digital controlled switch's digital controlled switch'sMultiplexers in the 74LS series are suitable for a wide range of applications.The basic configuration includes 16 terminations.The base part number is 74LS139, so you can find its logic switch related parts using that number.The multiplexer is supplied with 5V voltage.Signal switch has 16 component pins.This supply type employs Single.A total of 16 pins are configured on this board.Through Hole is the way it is mounted.The logic switch is a member of the family of LS.Signal multiplexer provides 4 bits.Normally, 5V is powered by a battery.The turn signal switch has 4 outputs.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.In addition, it provides improved features of SCHOTTKY CLAMPED FOR HIGH PERFORMANCE.Normally, the digitalswitch consists of 2 circuits.Stability of the multiplexers can be kept when the supply voltage of 100μA is delivered to the load.
SN74LS139AN Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SCHOTTKY CLAMPED FOR HIGH PERFORMANCE
Operating with the supply current of 100μA
SN74LS139AN Applications
There are a lot of Texas Instruments SN74LS139AN Signal Switches / Multiplexers / Decoders applications.
- Textile mills
- Analog to digital conversion
- Code converters
- Make half adder
- Enabling block of memory depending on address in memory chips
- Image transmission
- Code conversion
- Control unit of Central Processing unit (CPU)
- PCIe
- Automatic Monitoring systems
