SN74LS151DR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74LS151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 8:1 |
| Power Supplies | 5V |
| Power Dissipation | 30mW |
| Number of Bits | 16 |
| Propagation Delay | 32 ns |
| Quiescent Current | 6mA |
| Family | LS |
| Current - Output High, Low | 400μA 8mA |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Output Polarity | COMPLEMENTARY |
| Number of Input Lines | 8 |
| Voltage Supply Source | Single Supply |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS151DR Overview
In order to save board space, digital switch is located in the 16-SOIC (0.154, 3.90mm Width).The package is in the form of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC Multiplexer is used.If the operating temperature is maintained at 0°C~70°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 4.75V~5.25V voltage.Since they are members of the 74LS series, they can be used in a wide variety of applications.It is designed with 16 terminations as part of its basic configuration.The base part number is 74LS151, which can also be used to find its logic switch related parts.In multiplexer's system, 5V is the voltage supplied.Currently, this turn signal switch has a total of 16 component pins.It employs GULL WING as the point at which conductors come to an end.Its supply type is Single, which is used as the source of power.The board has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of LS the logic switch is a member.There are 16 bits signal multiplexer provides.It is provided that 5V has a power supply in order to function normally.The turn signal switch has 1 outputs designed for operation.Without the influence of external factors, it consumes 6mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The switches packaging is based on TR.For the purpose of accepting voltage levels, the multiplexers have 8 input lines.
SN74LS151DR Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
8 input lines
SN74LS151DR Applications
There are a lot of Texas Instruments SN74LS151DR Signal Switches / Multiplexers / Decoders applications.
- Idle motor
- Computer memory
- Memory chips
- Microprocessor instruction decoding
- Microprocessor input/output systems
- Medium scale TV wall
- GLAN
- War field flying robot with a night vision flying camera
- Transmission from the computer system of a satellite
- Arithmetic Logic Units
