SN74LS153D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74LS153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Power Dissipation | 31mW |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 26 ns |
| Quiescent Current | 6.2mA |
| Family | LS |
| Number of Inputs | 8 |
| Current - Output High, Low | 400μA 8mA |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS153D Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SOIC (0.154, 3.90mm Width).It is packaged according to the Tube method.Mounting is performed using Surface Mount.The analog IC used in the multiplexers can be referred to as Multiplexer.By maintaining the operating temperature at 0°C~70°C, turn signal switch will not be affected by external factors.Using a 4.75V~5.25V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74LS series, they can be used in a wide variety of applications.Among its basic features are 16 terminations.Its logic switch base part number is 74LS153 which can also be used to find its logic switch related parts.The multiplexer's system is powered by 5V volts.A component pin count of 16 can be found on this turn signal switch.GULL WING represents the end of conductors.The supply type of this multiplexer ic is Single.The board has 16 pins configured.It is mounted in the way of Surface Mount.The logic switch is included into the family of LS.The multiplexer ic provides 4 bits.It is provided that 5V has a power supply in order to function normally.As part of the operation of this turn signal switch, there are 1 outputs.Without the influence of external factors, it consumes 6.2mA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.This multiplexer has 8 inputs.The turn signal switch's circuit consists of 2 channels that are being used for transmission in the circuit.
SN74LS153D Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74LS153D Applications
There are a lot of Texas Instruments SN74LS153D Signal Switches / Multiplexers / Decoders applications.
- Signal router
- War field flying robot with a night vision flying camera
- Microprocessor instruction decoding
- Recording transmission
- Video transmission
- Data demultiplexing
- Data transfer
- Relay
- Logic circuits
- Implementing boolean functions with multiple variables
