SN74LS153DG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74LS153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Number of Bits | 4 |
| Propagation Delay | 26 ns |
| Family | LS |
| Number of Inputs | 8 |
| Current - Output High, Low | 400μA 8mA |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS153DG4 Overview
Due to the fact that it is provided in the 16-SOIC (0.154, 3.90mm Width), digital switch allows the board to be compacted.It is packaged according to the Tube method.Surface Mount is the mounting method digital switch ic uses.For the analog part of the multiplexers, an IC Multiplexer is used.When the operating temperature is kept at 0°C~70°C, turn signal switch will not be susceptible to external factors.A supply voltage of 4.75V~5.25V provides digital controlled switch's superior flexibility for designers.Since they are members of the 74LS series, they can be used in a wide variety of applications.Its basic configuration includes terminations in the 16 range.To find signal switch's related components, a base part number of 74LS153 may also be used.The multiplexer's system is powered by 5V volts.This turn signal switch has 16 component pins.It is the end of conductors that is represented by GULL WING.In this case, Single is employed as the supply type.This multiplexer ic is configured with 16 pins.The multiplexer ic is mounted in the direction of Surface Mount.I would like to refer to the logic switch as a member of the LS family.There are 4 bits in signal multiplexer.Normally, 5V is powered by a battery.There are 1 outputs designed to operate the turn signal switch.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.This multiplexer has a total of 8 inputs.This turn signal switch's circuit is based on a circuit with 2 channels.
SN74LS153DG4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74LS153DG4 Applications
There are a lot of Texas Instruments SN74LS153DG4 Signal Switches / Multiplexers / Decoders applications.
- Telephone network
- Textile mills
- Electronically controlled engine system
- Used to connect a single source to multiple destinations
- Data distribution
- Microprocessor instruction decoding
- Logic gates for other digital devices
- Data transfer
- Home automation system
- Enabling different rows of memory depending on address in memory chips
