SN74LS153N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Weight | 951.693491mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Series | 74LS |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74LS153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 2 x 4:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Power Dissipation | 31mW |
| Number of Bits | 4 |
| Throw Configuration | 4PST |
| Propagation Delay | 26 ns |
| Quiescent Current | 6.2mA |
| Family | LS |
| Number of Inputs | 8 |
| Current - Output High, Low | 400μA 8mA |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 5.08mm |
| Length | 19.3mm |
| Width | 6.35mm |
| Thickness | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS153N Overview
In order to conserve board space, digital switch is included in the 16-DIP (0.300, 7.62mm).Tube is the method used for packaging.In terms of mounting, digital switch ic uses the Through Hole method .In the multiplexers, the analog IC Multiplexer is used.If the operating temperature is maintained at 0°C~70°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.75V~5.25V.provides digital controlled switch's digital controlled switch'sMultiplexers from the 74LS series can be used in a wide range of applications.The basic configuration of this system includes 16 terminations.As its base part number is 74LS153, logic switch can also be used to find its related parts.The turn signal switch is supplied with a voltage of 5V volts.A component pin count of 16 can be found on this turn signal switch.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 16 pins.Multiplexer ics are mounted in the direction of Through Hole.The logic switch is included into the family of LS.In this signal multiplexer, there are 4 bits that are provided.It is provided that 5V has a power supply in order to function normally.This turn signal switch has 1 outputs designed for its operation.No external influence consumes 6.2mA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.There are 8 inputs provided in this multiplexer.This turn signal switch's circuit uses 2 transmission channels.
SN74LS153N Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74LS153N Applications
There are a lot of Texas Instruments SN74LS153N Signal Switches / Multiplexers / Decoders applications.
- VGA
- Analog to digital conversion
- Injectors
- Microprocessor input/output systems
- Paper plants
- Speed control of medern motors
- PCIe
- CPU memory location identification
- Electronics industry
- Video transmission
