SN74LS155ADRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 141.690917mg |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Series | 74LS |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | USABLE AS 1 TO 8 DEMULTIPLEXER |
| Subcategory | Decoder/Drivers |
| Packing Method | TR |
| Technology | TTL |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | 74LS155 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Power Supplies | 5V |
| Load Capacitance | 15pF |
| Number of Bits | 4 |
| Propagation Delay | 27 ns |
| Turn On Delay Time | 30 ns |
| Family | LS |
| Logic Function | Decoder, Demultiplexer |
| Output Characteristics | TOTEM POLE |
| Current - Output High, Low | 400μA 8mA |
| Supply Type | Single |
| Bandwidth | 35MHz |
| Max I(ol) | 0.008 A |
| Power Supply Current-Max (ICC) | 10mA |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height | 1.75mm |
| Length | 9.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
SN74LS155ADRG4 Overview
Due to the lack of space on the board, digital switch is provided in the 16-SOIC (0.154, 3.90mm Width).Tape & Reel (TR) represents its packaging.Mounting is performed using Surface Mount.Decoder/Demultiplexer is the analog IC that the multiplexers uses.In the case of 0°C~70°C, turn signal switch will not be affected by external factors.A supply voltage of 4.75V~5.25V provides digital controlled switch's superior flexibility for designers.The multiplexers from 74LS series can be used for a wide range of applications.The basic configuration includes 16 terminations.The base part number is 74LS155, so you can find its logic switch related parts using that number.In this case, 5V is the voltage supplied to the multiplexer's system.Signal switch has 16 component pins.As the end of conductors, it uses GULL WING.As a type of supply, Single is employed.The board is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The LS family includes the logic switch.In the signal multiplexer, there are 4 bits available.There is a power supply provided for the mux switch's normal operation of 5V.In electronic terms, the digital switch ic is classified as part number Decoder/Drivers.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The switches is packaged according to the way of TR.The multiplexers have2 input lines on the board that accept voltage levels.In addition, it provides improved features of USABLE AS 1 TO 8 DEMULTIPLEXER.
SN74LS155ADRG4 Features
Supplied in the 16-SOIC (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
2 input lines
USABLE AS 1 TO 8 DEMULTIPLEXER
SN74LS155ADRG4 Applications
There are a lot of Texas Instruments SN74LS155ADRG4 Signal Switches / Multiplexers / Decoders applications.
- Recording transmission
- Seven segment displays
- Speed synchronization of multiple motors in industries
- Data-routing applications
- A/D converters
- Audio transmission
- Data collection system
- Data transfer
- To select different task for memory in microprocessor memory systems
- Frequency multiplexing system
